VCI Specialty Solutions

VCI Specialty Solutions are used in metal processing applications such as a lubricant, wash, final rinse, protection of closed systems (boilers, tanks, piping), and general metalworking purposes.

Nox-Rust 5400

Nox-Rust 5400 is a rust preventive oil incorporated with petroleum additives. Used as a wash, the 5400 leaves behind a lubricant and corrosion preventive film without interfering with assembly sealers, adhesives, painting, welding and cleaning solutions. Conventional cleaning methods can be used to remove the Nox-Rust 5400 easily. It is also approved for use as lubricant/preservative on sheet and coil sheet by major automotive manufacturers.

  • Protection Time: 1-2 years indoors; 3-6 months outdoors protected
  • Appearance: Light oily/waxy
  • Metal Protection: Cold rolled steel; sheet metal stamping; automotive parts
  • Approvals: OEM approved as a weldable RP, a preservative and lubricant
  • Also available in convenient 11 oz. aerosol spray
Nox-Rust 7100

A general use water-displacing stamping oil, the Nox-Rust 7100 is a necessary solution needed for any plant operation with stamping operation that uses water-base cutting fluids. These companies typically manufacturers springs, machine tools, compressors, gears, driveshafts, precision parts, watch components, taps, drills, and parts for refrigeration, aviation and transportation.

The transparent oil repels residual cutting fluids and will not clog stamping dies, which is a crucial benefit. It is also non-staining, another vital quality for in-plant or cross plant processing. After application, it dries to a soft dry film barely noticeable, except for the sparkling lustre it puts on treated metal. To apply the Nox-Rust 7100, users can dip, spray or brush. In most scenarios, removal is not necessary.

  • Protection Time: 3-6 months indoor
  • Appearance: Light, transparent, oily; dries to a transparent, non-discernible film
  • Metal Protection: Multi-metals
  • Approvals: OEM product
  • Also available in convenient 11 oz. aerosol spray
Nox-Rust 7800

Known as the top all-purpose lubricant, the Nox-Rust 7800 not only provides temporary corrosion protection it can also be used to un-seize a stubborn nut to keep machines running smoothly.

Water-displacing, low viscosity lubricant and a corrosion prevention solution, the Nox-Rust 7800 protects both ferrous and non-ferrous parts during storage and covered transit at a low film thickness. No mixing or preparation is required, and it is compatible with barium lube grease while functioning as an excellent lubricating oil for assembly parts. It features a unique capability to creep and penetrate very tight and hard-to-reach areas. Remaining at a liquid state, even at -70°F, makes the Nox-Rust 7800 applicable in the military as gun oil for firearms in cold climates. Nox-Rust 7800 is also ideal in transit and transportation industries, machined parts and even routine maintenance shop use.

To use the Nox-Rust 7800, apply by spray, dip or brush. If removal is required, users can use mineral spirits, high-pressure steam or hot alkaline wash.

  • Protection Time: up to 12 months indoor
  • Appearance: Light, oily film
  • Metal Protection: Steel; metalworking, precision parts – ferrous and non-ferrous
  • Approvals: OEM product
Nox-Rust 9300

Nox-Rust 9300, an all-purpose, water-displacing corrosion inhibitor additive for final stage rinse, prevents corrosion from taking place during shipment and storage of machined parts, tools, treated steel, and assembles. The solution can be diluted with water petroleum solvent and applied by dip, spray or brush.

  • Protection Time: 3-9 months indoor
  • Appearance: Light, transparent liquid; dries to a thin, oily emulsion
  • Metal Protection: Steel
  • Approvals: OEM product
Nox-Rust 9700

Nox-Rust 9700 is a synthetic, water-based rust preventive, designed as a final and in-process RP additive. Removes dirt and debris from steel before mill oils are applied. Add to cutting fluids, metalworking fluids, or final stage rinse. It is also water displacing and is compatible with zinc and copper.

  • Protection Time: Limited indoor 1-12 weeks
  • Appearance: Straw coloured, clear, aqueous solution that dries to a thin, soft film
  • Metal Protection: Steel
  • Approvals: OEM product